2018 Microsoft 70-741問題集

Ktestの試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、Ktestの試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。Ktestは70-741試験参考書に合格することを助けてあげますから。

Microsoftの70-741試験参考書のオンラインサービスのスタディガイドを買いたかったら、Ktestを買うのを薦めています。Ktestは同じ作用がある多くのサイトでリーダーとしているサイトで、最も良い品質と最新のトレーニング資料を提供しています。弊社が提供したすべての勉強資料と他のトレーニング資料はコスト効率の良い製品で、サイトが一年間の無料更新サービスを提供します。ですから、弊社のトレーニング製品はあなたが試験に合格することを助けにならなかったら、全額で返金することを保証します。Microsoftの70-741試験参考書の認定試験に合格すれば、就職機会が多くなります。Networking with Windows Server 2016試験に合格すれば勉強者の専門知識がとても強いを証明し得ます。

勉強者のKtest製品研究ガイドを読み取ることにより、専門家の数千人が同様に彼らの認定試験とキャリアの中で成功しました。あなたはKtestが提供する70-741試験の質問と回答の研究ガイドのPDFをダウンロードして、保証はいかなる意味を持つかどうかをチェックしてみてください。Ktestを信頼し、あなたが失望されません！ Microsoftの70-741試験問題集のトレーニングコースは、同じ品質の同等を持っていない究極の学習ツールを、MCSA認定資格のNetworking with Windows Server 2016を試験パックの形で組み合わされています。

Share some MCSA 70-741 exam questions and answers below.
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

Your network contains Windows and non-Windows devices.

You have a DHCP server named Server1 that has an IPv4 scope named Scope1.

You need to prevent a client computer that uses the same name as an existing registration from updating the registration.

What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.

B. From the properties of Scope1, configure Name Protection.

C. From the properties of IPv4, configure the bindings.

D. From IPv4, create a new filter.

E. From the properties of Scope1, create an exclusion range.

F. From IPv4 run the DHCP Policy Configuration Wizard.

G. From Control Panel, modify the properties of Ethernet.

H. From Scope1, create a reservation.

Answer: F

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.

Solution: You activate the scope.

Does this meet the goal?

A. Yes

B. No

Answer: A

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Reconcile-DhcpServerv4IPRecord cmdlet.

Does this meet the goal?

A. Yes

B. No

Answer: B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.

Solution: You increase the scope size.

Does this meet the goal?

A. Yes

B. No

Answer: B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.

Users report that their client computers fail to obtain an IP address.

You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.

You need to ensure that all of the client computers on the network can obtain an IP address from Server2.

Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.

Does this meet the goal?

A. Yes

B. No

Answer: B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.

Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.

On Server1, you have the following zone configuration.

You have the following subnets defined on Server1.

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.

Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies.

Does this meet the goal?

A. Yes

B. No

Answer: B

Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \contoso.comnamespace1.

The domain contains a file server named Server1 that runs Windows Server 2016.

You create a folder named Folder1 on Server1.

Which two cmdlets should you use? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

A. New-DfsnFolderTarget

B. Install-WindowsFeature

C. Grant-DfsnAccess

D. New-DfsnFolder

E. New-SmbShare

Answer: BC

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.

Does this meet the goal?

A. Yes

B. No

Answer: B

Ktestが提供する資料は比べものにならない資料です。これは前例のない真実かつ正確なものです。Ktestの70-741試験参考書を選んだら、勉強者がもっと十分の時間で試験に準備できるように、当社は一年間の無料更新サービスを提供します。そうしたら、試験からの緊張感を解消することができ、勉強者は最大のメリットを取得できます。弊社の70-741試験問題集を買ったら、一年間の無料更新サービスを提供してもいいんです。もっと長い時間をもらって試験を準備したいのなら、勉強者がいつでもサブスクリプションの期間を伸びることができます。しかしこの試験は難しさがあって、合格率がずっと低いです。でもKtestのNetworking with Windows Server 2016最新問題集がこの問題を解決できますよ。MCSA認定資格70-741試験参考書の真実問題と模擬練習問題があって、十分に試験に合格させることができます

Comments are closed.